鉆探抽沙船,鉆探抽沙船廠家-青州冠誠重工機械有限公司

Drilling pump sand pumping vessel, drilling manufacturers preferred Qingzhou Guancheng Heavy Industry Machinery Co., Ltd.

冠誠鉆探抽沙船:
鉆探式抽沙船的概述：本設備為鉆探式抽沙船,抽沙部分是機械系統。適用于有泥層的水庫或河道抽沙等工作。抽沙設備操作方便，工作效率高、投資見效快、維修方便、油耗小、污染小等優點。抽沙設備適應環境:河道內有泥層、石子含量少（≤20%），石子直徑不大于30mm。適應溫度：高40℃，低-10℃.大風速不超過4級。

Prudential crown drilling sand pumping:

Overview of drilling pump sand: This equipment for drilling pump sand, sand pumping part is a mechanical system. Applicable to the reservoir with mud or riversand etc.. Sand pumping device has the advantages of convenient operation, high work efficiency, investment advantages of quick, convenient repair, small oil consumption, little pollution etc.. Sand pumping device to adapt to the environment: the river mud layer, gravel content is low (below 20%), stone diameter not more than 30mm. Adaptation: the highest temperature 40 ℃ -10 ℃, the lowest maximum wind speed does not exceed 4.